Product
Aluminium coil, slit to the width your line runs.
Flat rolled coil for roofing, cladding, ducting, composite panel and downstream forming — supplied at the gauge and width your machine is set up for.
- Common grades
- 1050 · 3003 · 5052 · 8011
- Gauge
- 0.2 – 3.0 mm
- Width
- Up to 1500 mm, slit to order
- Finish
- Mill, coated, embossed
Slitting to your line
A coil that is 40 mm too wide for your decoiler is scrap and rework. Tell us the width your line runs, the coil weight it can carry and the core diameter it takes, and the coil arrives ready to load instead of ready to re-slit.
Gauge and grade
Roofing and cladding work usually sits in 1050 or 3003 for formability and corrosion resistance at low cost. 5052 comes in where the formed part has to hold its shape or faces weather and marine air. 8011 is the usual choice for foil and fin stock at the thin end of the range. If the part will be bent tightly, the temper matters as much as the alloy — tell us the bend radius and we will recommend one.
Coated and embossed coil
Pre-coated coil saves a painting operation downstream and arrives colour-matched across the batch. Embossed stucco finish is common on cladding and insulation jacketing. Both are sourced to order, so lead time runs on the mill schedule rather than on stock.
What it ends up in
- Roofing and cladding — profiled sheet, standing seam, rainwater goods
- Ducting and insulation jacketing
- Aluminium composite panel and sandwich panel skins
- Roll forming, stamping and deep drawing feedstock
- Fin stock and heat exchanger strip
- Transport bodies, trailer panels and signage
Specification
Flat rolls at a glance.
Ranges below cover what moves regularly. Anything outside them is sourced to order — send the requirement and we will confirm feasibility and lead time.
- Common grades
- 1050 · 3003 · 5052 · 8011
- Temper
- O, H14, H16, H18, H24 by grade and gauge
- Thickness
- 0.2 – 3.0 mm
- Width
- Up to 1500 mm; slit to required width
- Finish
- Mill, pre-coated, embossed, PVC-filmed
- Coil form
- Standard core; coil weight to suit your decoiler
Grades for this form: 5052 aluminium1100 aluminium — or send the grade your drawing calls for.
Also stocked
Other forms we supply.
Most orders mix forms. One enquiry covers all of them, and one delivery brings them.
ProductExtrusions
Profiles for façades, window and door systems, frames and machine builds.
View details
ProductSheets
Thin-gauge sheet for panels, enclosures and general sheet-metal work.
View details
ProductPlates
Thick plate for machined parts, tooling, base plates and structural work.
View details
ProductBars
Round, square, flat and hex bar in machining grades, cut to length so your bar feeder gets what it expects.
View detailsBefore you ask
Flat rolls: what buyers ask.
If yours isn't answered here, call and ask — you'll reach someone who knows the stock.
Can you slit coil to a non-standard width?
Yes — that is the normal request. Give us the finished width, the coil weight your decoiler takes and the core diameter, and the coil is slit before it ships.
What is the minimum order for coil?
Flat rolls are sourced to order, so the minimum is tied to the mill run rather than to our yard. Send the grade, gauge, width and annual quantity and we will tell you whether it clears the minimum or whether sheet is the better buy.
Do you supply colour-coated coil?
Yes, pre-coated to an agreed shade and coating system, and embossed stucco finish where the application calls for it. Both run on mill lead times.
How thin can you go?
Down to about 0.2 mm in the common grades. Below that you are into foil, which we also supply — ask and we will quote it as foil rather than as coil.