What we stock
Five families of semi-finished aluminium.
Imported from mills we have worked with for years, held in stock at Peenya and cut to your requirement before it ships. Pick the form you need — each page carries the grades, sizes and finishes we supply, and powder coating or anodizing can be added to the order.
ProductExtrusions
Profiles for façades, window and door systems, frames and machine builds.
ProductFlat rolls
Flat rolled coil for roofing, cladding, ducting, composite panel and downstream forming.
ProductSheets
Thin-gauge sheet for panels, enclosures and general sheet-metal work.
ProductPlates
Thick plate for machined parts, tooling, base plates and structural work.
ProductBars
Round, square, flat and hex bar in machining grades, cut to length so your bar feeder gets what it expects.
Value added
Powder coating and anodizing.
Profiles and sheet can leave our yard finished, so the material reaches your line ready to install instead of waiting on a third coater.
Powder coating
Architectural and industrial
Anodizing
Natural and colour
Reference
Grades and sizes by form.
If your drawing calls for something outside this table, send it over — most of what we import is sourced to order anyway.
| Product | Common grades | Typical range | Finish |
|---|---|---|---|
| Extrusions | 6063 · 6101 · 1050 · 6061 · 6082 · 7075 | Profiles to 6 m, custom dies | Mill, anodised, powder-coated |
| Flat rolls | 1050 · 3003 · 5052 · 8011 | 0.2–3.0 mm, widths to 1500 mm | Mill, coated, embossed |
| Sheets | 1100 · 3003 · 5052 · 5083 · 7075 | 0.5–6 mm, 4×8 ft and 5×10 ft | Mill, PVC-filmed |
| Plates | 5083 · 6061 · 7075 | 6–200 mm, cut to size | Mill, sawn edge |
| Bars | 6061 · 6082 · 7075 · 2014 | Ø 6–200 mm; square, flat, hex | Mill, drawn |
Tempers available on request — T4, T5, T6 and H-series depending on form. Mill test certificates supplied with every consignment.
Ordering
Questions about our range.
Form, grade and quantity settle most of it. Ask us the rest.
Which forms do you hold in stock versus source to order?
Sheet, plate and bar are held at the Peenya yard and move in small quantities. Flat rolled coil and custom extrusion profiles are sourced to order against the mill run, so they carry a minimum and a longer lead time.
Can one order cover several forms?
Yes, and it usually does. Send the whole requirement in one enquiry — plate, bar and section together — and it is quoted as one order and delivered as one consignment.
Do you supply anything outside these five families?
Yes — ingots, foils, roofing sheets, heat sinks and composite panels are all supplied. Send the specification and we will quote it.